netfpga10g: Add build scriptHEAD0.1master

This adds a build script to build the netfpga project.

Signed-off-by: Dimitri Staessens <[email protected]>

1 files changed, 403 insertions, 0 deletions

diff --git a/netfpga10g/raptor.tcl b/netfpga10g/raptor.tcl
new file mode 100644
index 0000000..58a4465
--- /dev/null
+++ b/netfpga10g/raptor.tcl
@@ -0,0 +1,403 @@
+#
+# Project automation script for raptor
+#
+# Created for ISE version 14.7
+#
+# This file contains several Tcl procedures (procs) that you can use to automate
+# your project by running from xtclsh or the Project Navigator Tcl console.
+# If you load this file (using the Tcl command: source raptor.tcl), then you can
+# run any of the procs included here.
+#
+# This script is generated assuming your project has HDL sources.
+# Several of the defined procs won't apply to an EDIF or NGC based project.
+# If that is the case, simply remove them from this script.
+#
+# You may also edit any of these procs to customize them. See comments in each
+# proc for more instructions.
+#
+# This file contains the following procedures:
+#
+# Top Level procs (meant to be called directly by the user):
+#    run_process: you can use this top-level procedure to run any processes
+#        that you choose to by adding and removing comments, or by
+#        adding new entries.
+#    rebuild_project: you can alternatively use this top-level procedure
+#        to recreate your entire project, and the run selected processes.
+#
+# Lower Level (helper) procs (called under in various cases by the top level procs):
+#    show_help: print some basic information describing how this script works
+#    add_source_files: adds the listed source files to your project.
+#    set_project_props: sets the project properties that were in effect when this
+#        script was generated.
+#    create_libraries: creates and adds file to VHDL libraries that were defined when
+#        this script was generated.
+#    set_process_props: set the process properties as they were set for your project
+#        when this script was generated.
+#
+
+set myProject "raptor"
+set myScript "raptor.tcl"
+
+#
+# Main (top-level) routines
+#
+# run_process
+# This procedure is used to run processes on an existing project. You may comment or
+# uncomment lines to control which processes are run. This routine is set up to run
+# the Implement Design and Generate Programming File processes by default. This proc
+# also sets process properties as specified in the "set_process_props" proc. Only
+# those properties which have values different from their current settings in the project
+# file will be modified in the project.
+#
+proc run_process {} {
+
+   global myScript
+   global myProject
+
+   ## put out a 'heartbeat' - so we know something's happening.
+   puts "\n$myScript: running ($myProject)...\n"
+
+   if { ! [ open_project ] } {
+      return false
+   }
+
+   set_process_props
+   #
+   # Remove the comment characters (#'s) to enable the following commands
+   # process run "Synthesize"
+   # process run "Translate"
+   # process run "Map"
+   # process run "Place & Route"
+   #
+   set task "Implement Design"
+   if { ! [run_task $task] } {
+      puts "$myScript: $task run failed, check run output for details."
+      project close
+      return
+   }
+
+   set task "Generate Programming File"
+   if { ! [run_task $task] } {
+      puts "$myScript: $task run failed, check run output for details."
+      project close
+      return
+   }
+
+   puts "Run completed (successfully)."
+   project close
+
+}
+
+#
+# rebuild_project
+#
+# This procedure renames the project file (if it exists) and recreates the project.
+# It then sets project properties and adds project sources as specified by the
+# set_project_props and add_source_files support procs. It recreates VHDL Libraries
+# as they existed at the time this script was generated.
+#
+# It then calls run_process to set process properties and run selected processes.
+#
+proc rebuild_project {} {
+
+   global myScript
+   global myProject
+
+   project close
+   ## put out a 'heartbeat' - so we know something's happening.
+   puts "\n$myScript: Rebuilding ($myProject)...\n"
+
+   set proj_exts [ list ise xise gise ]
+   foreach ext $proj_exts {
+      set proj_name "${myProject}.$ext"
+      if { [ file exists $proj_name ] } {
+         file delete $proj_name
+      }
+   }
+
+   project new $myProject
+   set_project_props
+   add_source_files
+   create_libraries
+   puts "$myScript: project rebuild completed."
+
+   run_process
+
+}
+
+#
+# Support Routines
+#
+
+#
+proc run_task { task } {
+
+   # helper proc for run_process
+
+   puts "Running '$task'"
+   set result [ process run "$task" ]
+   #
+   # check process status (and result)
+   set status [ process get $task status ]
+   if { ( ( $status != "up_to_date" ) && \
+            ( $status != "warnings" ) ) || \
+         ! $result } {
+      return false
+   }
+   return true
+}
+
+#
+# show_help: print information to help users understand the options available when
+#            running this script.
+#
+proc show_help {} {
+
+   global myScript
+
+   puts ""
+   puts "usage: xtclsh $myScript <options>"
+   puts "       or you can run xtclsh and then enter 'source $myScript'."
+   puts ""
+   puts "options:"
+   puts "   run_process       - set properties and run processes."
+   puts "   rebuild_project   - rebuild the project from scratch and run processes."
+   puts "   set_project_props - set project properties (device, speed, etc.)"
+   puts "   add_source_files  - add source files"
+   puts "   create_libraries  - create vhdl libraries"
+   puts "   set_process_props - set process property values"
+   puts "   show_help         - print this message"
+   puts ""
+}
+
+proc open_project {} {
+
+   global myScript
+   global myProject
+
+   if { ! [ file exists ${myProject}.xise ] } {
+      ## project file isn't there, rebuild it.
+      puts "Project $myProject not found. Use project_rebuild to recreate it."
+      return false
+   }
+
+   project open $myProject
+
+   return true
+
+}
+#
+# set_project_props
+#
+# This procedure sets the project properties as they were set in the project
+# at the time this script was generated.
+#
+proc set_project_props {} {
+
+   global myScript
+
+   if { ! [ open_project ] } {
+      return false
+   }
+
+   puts "$myScript: Setting project properties..."
+
+   project set family "Virtex5"
+   project set device "xc5vtx240t"
+   project set package "ff1759"
+   project set speed "-2"
+   project set top_level_module_type "HDL"
+   project set synthesis_tool "XST (VHDL/Verilog)"
+   project set simulator "ISim (VHDL/Verilog)"
+   project set "Preferred Language" "VHDL"
+   project set "Enable Message Filtering" "false"
+
+}
+
+
+#
+# add_source_files
+#
+# This procedure add the source files that were known to the project at the
+# time this script was generated.
+#
+proc add_source_files {} {
+
+   global myScript
+
+   if { ! [ open_project ] } {
+      return false
+   }
+
+   puts "$myScript: Adding sources to project..."
+
+   xfile add "constraints.ucf"
+   xfile add "coregen/block_ram.ngc"
+   xfile add "coregen/block_ram.vhd"
+   xfile add "coregen/cmd_fifo.ngc"
+   xfile add "coregen/data_fifo.ngc"
+   xfile add "coregen/pcie_core/source/bram_common.v"
+   xfile add "coregen/pcie_core/source/cmm_decoder.v"
+   xfile add "coregen/pcie_core/source/cmm_errman_cnt_en.v"
+   xfile add "coregen/pcie_core/source/cmm_errman_cor.v"
+   xfile add "coregen/pcie_core/source/cmm_errman_cpl.v"
+   xfile add "coregen/pcie_core/source/cmm_errman_ftl.v"
+   xfile add "coregen/pcie_core/source/cmm_errman_ram4x26.v"
+   xfile add "coregen/pcie_core/source/cmm_errman_ram8x26.v"
+   xfile add "coregen/pcie_core/source/cmm_intr.v"
+   xfile add "coregen/pcie_core/source/extend_clk.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_cf.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_cf_arb.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_cf_err.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_cf_mgmt.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_cf_pwr.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_if.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_ll.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_ll_arb.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_ll_credit.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_ll_oqbqfifo.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_ll_tx.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_ll_tx_arb.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_plus_ll_rx.v"
+   xfile add "coregen/pcie_core/source/pcie_blk_plus_ll_tx.v"
+   xfile add "coregen/pcie_core/source/pcie_clocking.v"
+   xfile add "coregen/pcie_core/source/pcie_core.v"
+   xfile add "coregen/pcie_core/source/pcie_ep.v"
+   xfile add "coregen/pcie_core/source/pcie_gt_wrapper.v"
+   xfile add "coregen/pcie_core/source/pcie_gt_wrapper_top.v"
+   xfile add "coregen/pcie_core/source/pcie_gtx_wrapper.v"
+   xfile add "coregen/pcie_core/source/pcie_mim_wrapper.v"
+   xfile add "coregen/pcie_core/source/pcie_reset_logic.v"
+   xfile add "coregen/pcie_core/source/pcie_soft_int.v"
+   xfile add "coregen/pcie_core/source/pcie_top.v"
+   xfile add "coregen/pcie_core/source/prod_fixes.v"
+   xfile add "coregen/pcie_core/source/sync_fifo.v"
+   xfile add "coregen/pcie_core/source/tlm_rx_data_snk.v"
+   xfile add "coregen/pcie_core/source/tlm_rx_data_snk_bar.v"
+   xfile add "coregen/pcie_core/source/tlm_rx_data_snk_mal.v"
+   xfile add "coregen/pcie_core/source/tlm_rx_data_snk_pwr_mgmt.v"
+   xfile add "coregen/pcie_core/source/tx_sync_gtp.v"
+   xfile add "coregen/pcie_core/source/tx_sync_gtx.v"
+   xfile add "coregen/ram_4kB.ngc"
+   xfile add "coregen/ram_4kB.vhd"
+   xfile add "coregen/simple_fifo.ngc"
+   xfile add "hdl/buff.vhd"
+   xfile add "hdl/dma.vhd"
+   xfile add "hdl/engine.vhd"
+   xfile add "hdl/eth.vhd"
+   xfile add "hdl/eth_rx.vhd"
+   xfile add "hdl/eth_tx.vhd"
+   xfile add "hdl/mdio.vhd"
+   xfile add "hdl/pcie.vhd"
+   xfile add "hdl/pcie_rx.vhd"
+   xfile add "hdl/pcie_tx.vhd"
+   xfile add "hdl/pcie_wrapper.vhd"
+   xfile add "hdl/port_fifo.vhd"
+   xfile add "hdl/recv_mux.vhd"
+   xfile add "hdl/rx_eth.vhd"
+   xfile add "hdl/send_mux.vhd"
+   xfile add "hdl/system_loop.vhd"
+   xfile add "hdl/top.vhd"
+   xfile add "hdl/tx_eth.vhd"
+   xfile add "hdl/xaui/xaui_top.vhd"
+   xfile add "hdl/xaui/xaui_v10_4.ngc"
+   xfile add "hdl/xaui/xaui_v10_4_block.vhd"
+   xfile add "hdl/xaui/xaui_v10_4_cc_2b_1skp.vhd"
+   xfile add "hdl/xaui/xaui_v10_4_chanbond_monitor.vhd"
+   xfile add "hdl/xaui/xaui_v10_4_rocketio_wrapper.vhd"
+   xfile add "hdl/xaui/xaui_v10_4_rocketio_wrapper_tile.vhd"
+   xfile add "hdl/xaui/xaui_v10_4_tx_sync.vhd"
+   xfile add "tests/buff_test.vhd"
+   xfile add "tests/engine_test.vhd"
+   xfile add "tests/eth_buff_loop_test.vhd"
+   xfile add "tests/eth_rx_test.vhd"
+   xfile add "tests/eth_tx_test.vhd"
+   xfile add "tests/pcie_rx_test.vhd"
+   xfile add "tests/pcie_tx_test.vhd"
+   xfile add "tests/queue_test.vhd"
+   xfile add "tests/send_mux_test.vhd"
+   xfile add "tests/system_loop_test.vhd"
+
+   # Set the Top Module as well...
+   project set top "arch" "top"
+
+   puts "$myScript: project sources reloaded."
+
+} ; # end add_source_files
+
+#
+# create_libraries
+#
+# This procedure defines VHDL libraries and associates files with those libraries.
+# It is expected to be used when recreating the project. Any libraries defined
+# when this script was generated are recreated by this procedure.
+#
+proc create_libraries {} {
+
+   global myScript
+
+   if { ! [ open_project ] } {
+      return false
+   }
+
+   puts "$myScript: Creating libraries..."
+
+
+   # must close the project or library definitions aren't saved.
+   project save
+
+} ; # end create_libraries
+
+#
+# set_process_props
+#
+# This procedure sets properties as requested during script generation (either
+# all of the properties, or only those modified from their defaults).
+#
+proc set_process_props {} {
+
+   global myScript
+
+   if { ! [ open_project ] } {
+      return false
+   }
+
+   puts "$myScript: setting process properties..."
+
+   project set "Reduce Control Sets" "Auto" -process "Synthesize - XST"
+   project set "Target UCF File Name" "/users/gsharma/raptor/netfpga10g/constraints.ucf" -process "Back-annotate Pin Locations"
+   project set "Enable Internal Done Pipe" "true" -process "Generate Programming File"
+   project set "LUT Combining" "Auto" -process "Synthesize - XST"
+
+   puts "$myScript: project property values set."
+
+} ; # end set_process_props
+
+proc main {} {
+
+   if { [llength $::argv] == 0 } {
+      show_help
+      return truever
+   }
+
+   foreach option $::argv {
+      switch $option {
+         "show_help"           { show_help }
+         "run_process"         { run_process }
+         "rebuild_project"     { rebuild_project }
+         "set_project_props"   { set_project_props }
+         "add_source_files"    { add_source_files }
+         "create_libraries"    { create_libraries }
+         "set_process_props"   { set_process_props }
+         default               { puts "unrecognized option: $option"; show_help }
+      }
+   }
+}
+
+if { $tcl_interactive } {
+   show_help
+} else {
+   if {[catch {main} result]} {
+      puts "$myScript failed: $result."
+   }
+}