summaryrefslogtreecommitdiff
path: root/src/ipcpd
Commit message (Collapse)AuthorAgeFilesLines
* ipcpd: Include ipcp-dev header in DHT0.11.5Dimitri Staessens2018-05-081-1/+1
| | | | | | | | The DHT called ipcp_sdb_release without including ipcp-dev, causing compiler errors on some machines. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix setting MTU for eth-llcDimitri Staessens2018-05-081-3/+12
| | | | | | | | The MTU was not correctly set for the eth-llc ipcp. This also fixes a missing definition of ETH_MAX_MTU, which was introduced in kernel v4.10. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix parameter in debug logDimitri Staessens2018-05-081-2/+2
| | | | | | | | The cpu was a size_t but printed as an unsigned long, giving compilation errors on 32 bit machines. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Use correct MTU for eth-dixDimitri Staessens2018-05-071-4/+24
| | | | | | | | The eth-dix IPCP was using a hardcoded MTU of 1500 bytes, but could support higher MTUs. Now jumbo frames are supported. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix bad memory handling in LFA policySander Vrijders2018-05-042-7/+8
| | | | | | | | | | | | | The Loop-Free Alternates policy had bad memory management in two places. In the calculation of the LFAs a table was freed in the first iteration of a loop, whereas it was still needed in the other iterations. It is now freed outside of the loop. In the alternate PFF the address structs were not freed upon shutdown, this has been added as well. It also fixes some bad initialization in the LFA calculation function. Signed-off-by: Sander Vrijders <[email protected]> Signed-off-by: Dimitri Staessens <[email protected]>
* ipcpd: Limit number of returned query addresses0.11.4Dimitri Staessens2018-05-031-12/+18
| | | | | | | | | The query returned all addresses where a name was registered, causing some scaling problems. Now it will return at most DHT_RETR_ADDR, which is currently set at 1 (anycast). Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Allow wait for dir enrollment on dt connDimitri Staessens2018-05-037-2/+24
| | | | | | | | | This adds the option to wait for the directory (DHT) to enroll on creating a new data transfer connection. This makes scripting network bootstraps more stable. The default setting is OFF. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Recalculate PFF upon adding new neighborSander Vrijders2018-05-031-31/+42
| | | | | | | | | | This recalculates the PFF upon adding a new neighbor, so that the network reconverges faster. It is safe to do so since it is only done by the two IPCPs that established the new flow. The PFF is also recalculated every 4 seconds. Signed-off-by: Sander Vrijders <[email protected]> Signed-off-by: Dimitri Staessens <[email protected]>
* ipcpd: Prevent parallel DHT enrollment threadsDimitri Staessens2018-05-031-22/+24
| | | | | | | | | This will prevent quick calls to ipcp conn for dt flows to create multiple join threads in parallel, instead the subsequent calls will wait for the pending join to finish. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Make UNIX socket buffer size configurable0.11.3Sander Vrijders2018-05-031-2/+2
| | | | | | | | | | This makes the buffer size used by the UNIX sockets configurable. In case of a lot of IPCPs in the system it might become too small with the default value, resulting in irm command failures. The user can now easily configure it with an adequate value. Signed-off-by: Sander Vrijders <[email protected]> Signed-off-by: Dimitri Staessens <[email protected]>
* ipcpd: Don't do lookup with new DT when runningDimitri Staessens2018-05-031-4/+8
| | | | | | | | | | The DHT performed a lookup upon a new DT connection when it was running for efficiency reasons. This lookup somehow cause SEGV under stress (rapid bootstrapping of networks). This will be solved with a full revision of the DHT implementation. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Cleanup pending DHT commands on shutdownDimitri Staessens2018-05-031-0/+7
| | | | | | | The list of commands was not cleaned up on shutdown. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Remove cookie from DHT lookup at updateDimitri Staessens2018-05-031-1/+4
| | | | | | | | | | The lookup struct uses the cookies to track pending request messages, but they were not removed when a response is processed. Upon reuse of a cookie for the next message, it could update the wrong lookup. This removes the cookie for a lookup when it is looked for. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Shut down DHT gracefully during enrollmentDimitri Staessens2018-05-031-0/+10
| | | | | | | | | The DHT has a thread that continued to run during shutdown. The shutdown state is now checked for. It will not try to send messages at shutdown. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Create notifier before connmgrDimitri Staessens2018-04-261-9/+9
| | | | | | | | The connmgr requires the notifier, but the notifier was created after and destroyed before the connmgr. This is now fixed. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix truncate of small packetsDimitri Staessens2018-04-051-1/+1
| | | | | | | | The truncate was setting the length to the frame length, instead of the actual payload length to be delivered to the N+1. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Add ethertype checkDimitri Staessens2018-04-051-1/+7
| | | | | | | | An ethertype check was missing for the DIX ethernet IPCP, causing crashes if there is other traffic on the network. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Avoid unnecessary copy in eth writerDimitri Staessens2018-04-051-25/+45
| | | | | | | | | This writes into the Ethernet device directly from the rdrbuff to avoid a copy on the write side in the Ethernet IPCPs. This does not work for the netmap device. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Avoid unnecessary copy in eth readerDimitri Staessens2018-04-051-31/+70
| | | | | | | | | This reads from the Ethernet device directly into the rdrbuff to avoid a copy on the read side in the Ethernet IPCPs. This does not work for the netmap device. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Remove signal handler from ipcp.hDimitri Staessens2018-04-052-9/+4
| | | | | | | | The signal handler is completely embedded in the source file. There was no more need to call it from elsewhere. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Enable locking threads to a CPU coreDimitri Staessens2018-04-058-2/+49
| | | | | | | | | This adds a function that locks a thread to a random core. This greatly improves performance on multi-cpu systems. There is no portable way to do this, this only implements it for GNU/Linux. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix frame buffer in eth ipcpsDimitri Staessens2018-04-051-2/+2
| | | | | | | | The packets were being sent and read into a buffer that had the payload length instead of the frame length. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Simplify reg/unreg APIDimitri Staessens2018-03-221-7/+5
| | | | | | | | | | | | | | | | | | | | The reg/unreg API is simplified to registering and unregistering a single name with a single IPCP. The functionality associated with registering names was moved from the IRMd to the irm tool. The function to list IPCPs was simplified to return all IPCPs in the system with their basic properties needed for management. The above changes led to some needed changes in the irm tool and the management functions that were depending on the previous behaviour of list_ipcps. Command line functionality to list IPCPs in the system is also added to the irm tool. Some older code was refactored. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Allow disabling partial readDimitri Staessens2018-03-191-2/+6
| | | | | | | | | | | | | | This allows disabling partial reads. It adds a flag FLOWFRNOPART that disables partial reads. Partial read is different from partial delivery (FRCTFPARTIAL), which allows delivery of fragments of an incomplete packet and thus potentially corrupted data. FLOWFRNOPART will never deliver corrupted data (unless FRCTFPARTIAL is also set). If FLOWFRNOPART is set and the buffer provided to flow_read is too small for the SDU, that SDU will be discarded and -EMSGSIZE is returned; Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix reading LSAs in link-state policy0.10.7Dimitri Staessens2018-03-161-2/+2
| | | | | | | | | | | The read buffer had the exact length of a link-state message. With the partial read implemented, we should then do another read() to check if there are more parts of the message (which will return 0). To avoid the additional read() call every time, the buffer was extended by 1 byte. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Add validity checks for eth-dixDimitri Staessens2018-03-121-0/+4
| | | | | | | | This will check if the Ethertype value is a valid Ethertype in the irm tool and the eth-dix IPCPd. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Add length field to eth-dixDimitri Staessens2018-03-101-62/+57
| | | | | | | | | Some NICs added padding to the Ethernet II frames causing bad frame lengths and GPB unpack fails. This adds a 2-byte length field to the DIX frame to circumvent this. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Add IPCP over DIX EthernetDimitri Staessens2018-03-106-388/+678
| | | | | | | | | | | | | | | | | | This adds an IPC Process that uses DIX Ethernet with an Ethertype that is configurable at bootstrap. This allows parallel DIX layers over the same Ethernet network with different Ethertypes (and one LLC layer). It allows jumbo frames in the future, and should avoid the problems we have with some routers not handling LLC traffic very well. The destination endpoint ID is sent as a 16 bit integer, so the maximum payload is 1498 bytes in standard Ethernet, and 8998 bytes when Jumbo frames are used. The implementation is very similar to the Ethernet LLC IPCP, so it is implemented using preprocessor macros in the single source instead of duplicating code. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix bytes sent in send statisticsDimitri Staessens2018-03-081-6/+11
| | | | | | | | The number of bytes sent was not counting the data transfer PCI. This is now fixed. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Add fccntl operation to get queue lengthsDimitri Staessens2018-02-281-5/+17
| | | | | | | | | | This adds the FLOWGRXQLEN and FLOWGTXQLEN operations to fccntl to get the number of packets that are in the receive and transmit buffers respectively. The flow statistics are updated to show these queue lengths. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix flow statisticDimitri Staessens2018-02-261-1/+1
| | | | | | | There was a wrong rcv_bytes where it should have been snd_bytes. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix access to uninitialized valueDimitri Staessens2018-02-261-14/+14
| | | | | | | | | This fixes the access to an uninitialized dt_pci struct when updating flow statistics in the case there is no next hop, which often resulted in a segmentation fault. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix data race when accessing DHT stateDimitri Staessens2018-02-261-1/+2
| | | | | | | | The dht_get_state() function should be used to get the state of the DHT. This fixes bug #4. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix malformed sprintf in dt component0.10.2Dimitri Staessens2018-02-241-1/+1
| | | | | | | | The sprintf was missing a format string. Some compilers did not complain about this. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix missing free in graph implementationSander Vrijders2018-02-241-0/+2
| | | | | | | | There was a missing free in case the address was not found in the routing table when trying to add an LFA for a certain address. Signed-off-by: Sander Vrijders <[email protected]> Signed-off-by: Dimitri Staessens <[email protected]>
* ipcpd: Fix cleanup of sdu schedulerDimitri Staessens2018-02-241-7/+7
| | | | | | | | | | Not all threads were cancelled on exit. This fixes (the rather cryptic) error message "The futex facility returned an unexpected error code" when running the stack with the address sanitizer. Also fixes possible double frees when a pthread_create would fail. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Print establishment time in flow statsDimitri Staessens2018-02-231-22/+35
| | | | | | | | | | The time of establishment will be printed as part of the flow statistics (it is the same as the modification time of the file in the FUSE filesystem). Some output was reordered and the length of the sizes is updated to be sufficient for 64-bit values. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Print endpoint in flow statisticsDimitri Staessens2018-02-234-14/+30
| | | | | | | | | | The flow statistics will now print the endpoint of the flow. If it's a local endpoint for the IPCP, it will print the component (e.g. "flow-allocator"). For remote flows, it will print the address of the IPCP. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Reset flow statistics on reuseDimitri Staessens2018-02-231-0/+2
| | | | | | | | The flow statistics were not reset when a new connection was created, resulting in wrong statistics. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix locking issues in flow statisticsDimitri Staessens2018-02-231-12/+59
| | | | | | | | | The locks were not initialised correctly due to a misspelled define and the fail_write was trying to lock a bad mutex (sometimes -1 out of array). This also fixes the statistics gathered. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix double definition of ipcp configDimitri Staessens2018-02-233-43/+2
| | | | | | | | | | The import of the IPCP config protobuf message in the enrollment message caused a double definition. The enroll.proto file is deprecated and the definition of the enrollment message is moved to the library to avoid this. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix missing lock in link-state policyDimitri Staessens2018-02-231-0/+27
| | | | | | | | The replication of the database was missing a lock. Now the database is first copied under lock and then sent. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Export flow statistics to RIBDimitri Staessens2018-02-203-20/+399
| | | | | | | | | | This adds flow statistics for the data transfer (DT) component to the RIB. The DT component will keep track of the traffic on each flow. This feature can be enabled or disabled by setting the IPCP_FLOW_STATS variable in the build system. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Get RIB attributes from componentDimitri Staessens2018-02-201-29/+80
| | | | | | | | | | | | This revises the RIB so it gets the complete file attribute list from the component instead of setting some attributes in the library. This will allow setting read/write access later on in the component itself. The time of last change of lsdb entries in the file system is now set to the time of the last received Link State Update for that entry. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Revise Data Transfer component0.10.0Dimitri Staessens2018-02-1319-263/+255
| | | | | | | | | | | This makes the TTL non-optional and allows the maximum (initial) value of the TTL to be specified at bootstrap (the default is set to 60). The fd in the DT PCI is now called EID (Endpoint ID). The names "dif" and "ae" have been replaced by "layer" and "component" respectively in all sources. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Revise lookup tracking in DHTDimitri Staessens2018-02-102-54/+88
| | | | | | | | | | The lookups now track the responses by cookie instead of just counting the remaining number of responses. This is needed because simultaneous lookups for the same hash interfere with eachother and lead to missed responses. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* build: Use GNUInstallDirs instead of hardcoded values0.9.9Sander Vrijders2018-02-065-5/+5
| | | | | | | | This changes the build to use GNUInstallDirs instead of hardcoded values. Package maintainers can then override these defaults by passing the correct value to cmake on the command line. Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Replicate database on new MGMT flowDimitri Staessens2018-02-061-0/+17
| | | | | | | | This will trigger the existing member to send all entries in its database as LSAs to the new member. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Handle LU_DONE state in DHTDimitri Staessens2018-02-061-0/+1
| | | | | | | | The DHT would enter an infinite loop in lookup_wait() because the LU_DONE state was not handled correctly. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Wait for DHT_RUNNING state at register/query0.9.4Dimitri Staessens2018-01-251-4/+10
| | | | | | | | | This will make the register and query calls at the DHT wait for a JOIN to complete. This avoids fails when calling register immediately after creating a data transfer connection. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 23:49:25 +0000