summaryrefslogtreecommitdiff
path: root/src/ipcpd/ipcp.c
Commit message (Collapse)AuthorAgeFilesLines
* tools: Specify QoS cube for data transfer flows0.13.0Dimitri Staessens2018-10-191-1/+3
| | | | | | | | | The ipcp connect command can now set a specific qos cube for data transfer flows. For management flows, the tool ignores this and defaults to raw until data flows are stable enough. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd, irmd: Handle signal in main threadDimitri Staessens2018-10-181-60/+52
| | | | | | | | | The signals are now handled in the main thread instead of an asynchronous signal handler. The acceptloop is now correctly cancelled and the associated timeouts are removed. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Rename port_id to flow_idDimitri Staessens2018-10-051-8/+8
| | | | | | | Renames port_id to flow_id according to updated nomenclature. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Pass qosspec at flow allocationDimitri Staessens2018-10-051-2/+11
| | | | | | | | | | | | The flow allocator now passes the full qos specification to the endpoint, instead of just a cube. This is a more flexible architecture, as it makes QoS cubes internal to the layers. Adds endianness transforms for the flow allocator protocol in the normal IPCP. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* include: Remove _DEFAULT_SOURCE in endian.hDimitri Staessens2018-09-271-0/+4
| | | | | | | | This removes the _DEFAULT_SOURCE definition in the endian header as it should not be there. This avoids double and conflicting definitions. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix parameter in debug logDimitri Staessens2018-05-081-2/+2
| | | | | | | | The cpu was a size_t but printed as an unsigned long, giving compilation errors on 32 bit machines. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Make UNIX socket buffer size configurable0.11.3Sander Vrijders2018-05-031-2/+2
| | | | | | | | | | This makes the buffer size used by the UNIX sockets configurable. In case of a lot of IPCPs in the system it might become too small with the default value, resulting in irm command failures. The user can now easily configure it with an adequate value. Signed-off-by: Sander Vrijders <[email protected]> Signed-off-by: Dimitri Staessens <[email protected]>
* ipcpd: Remove signal handler from ipcp.hDimitri Staessens2018-04-051-3/+4
| | | | | | | | The signal handler is completely embedded in the source file. There was no more need to call it from elsewhere. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Enable locking threads to a CPU coreDimitri Staessens2018-04-051-0/+29
| | | | | | | | | This adds a function that locks a thread to a random core. This greatly improves performance on multi-cpu systems. There is no portable way to do this, this only implements it for GNU/Linux. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Simplify reg/unreg APIDimitri Staessens2018-03-221-7/+5
| | | | | | | | | | | | | | | | | | | | The reg/unreg API is simplified to registering and unregistering a single name with a single IPCP. The functionality associated with registering names was moved from the IRMd to the irm tool. The function to list IPCPs was simplified to return all IPCPs in the system with their basic properties needed for management. The above changes led to some needed changes in the irm tool and the management functions that were depending on the previous behaviour of list_ipcps. Command line functionality to list IPCPs in the system is also added to the irm tool. Some older code was refactored. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Add IPCP over DIX EthernetDimitri Staessens2018-03-101-1/+6
| | | | | | | | | | | | | | | | | | This adds an IPC Process that uses DIX Ethernet with an Ethertype that is configurable at bootstrap. This allows parallel DIX layers over the same Ethernet network with different Ethertypes (and one LLC layer). It allows jumbo frames in the future, and should avoid the problems we have with some routers not handling LLC traffic very well. The destination endpoint ID is sent as a 16 bit integer, so the maximum payload is 1498 bytes in standard Ethernet, and 8998 bytes when Jumbo frames are used. The implementation is very similar to the Ethernet LLC IPCP, so it is implemented using preprocessor macros in the single source instead of duplicating code. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Revise Data Transfer component0.10.0Dimitri Staessens2018-02-131-23/+24
| | | | | | | | | | | This makes the TTL non-optional and allows the maximum (initial) value of the TTL to be specified at bootstrap (the default is set to 60). The fd in the DT PCI is now called EID (Endpoint ID). The names "dif" and "ae" have been replaced by "layer" and "component" respectively in all sources. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* include, src: Update copyright to 2018Dimitri Staessens2018-01-091-1/+1
| | | | | | | Happy New Year, Ouroboros. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Use the term "layer" and deprecate "shim"Dimitri Staessens2017-12-191-4/+4
| | | | | | | | | | | | | | This changes the terminology to use layer instead of DIF and deprecate the word "shim" for the IPCPs that attach to Ethernet LLC and UDP .The terminology has not yet been changed in the variable names etc. This reflects the design choices in Ouroboros to make IPCPs pure resource allocators instead of also providing an "IPC service". The Ouroboros IPCPs that attach to Ethernet and UDP implement the allocator and are thus not really shims. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Make hash algorithm configurableSander Vrijders2017-12-041-25/+23
| | | | | | | | | | This makes the hashing algorithm configurable once more for the local and the shim-eth-llc, since their scope is so small that it is up to the network administrator to select a correct algorithm for the whole network. Signed-off-by: Sander Vrijders <[email protected]> Signed-off-by: Dimitri Staessens <[email protected]>
* lib, tools: Rename application process and instanceDimitri Staessens2017-12-021-4/+4
| | | | | | | | | | | This refactors ouroboros to use "program" instead of "application process" and "process" instead of "application process instance" to align with current naming in current Operating Systems courses instead of the ISO nomenclature adopted by RINA. This change permeates through the entire implementation. Also contains some minor other refactors. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Don't read commands under lockDimitri Staessens2017-11-301-3/+3
| | | | | | | | | The commands were read under a mutex. Since the cmd struct was just malloc'd, this is not needed. Also fixes closing the socket if the malloc fails. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Deprecate ouroboros_init and ourboros_finidimitri staessens2017-10-141-17/+0
| | | | | | | | | | | | | | This commit deprecates ouroboros_init and ouroboros_fini and adds them as a constructor or destructor, causing these function to be run automatically when a program that links to the library calls and exits main(). For this to fully work, the library had to be split so that we can avoid the irmd calling these functions (the IRMd has to create the shm structures on which these calls depend). The library is split in 3 parts: libouroboros-dev, libouroboros-irm and libouroboros-common. The latter is linked to the other two so that including libouroboros-dev or libouroboros-irm will also link libouroboros-common.
* lib: Cancel tpm threads instead of marking exitdimitri staessens2017-09-301-30/+29
| | | | | | | | | This makes the threadpool use pthread_cancel instead of setting an exit flag that threadpool managed threads check periodically. This drastically reduces CPU consumption in the irmd when running a lot of applications. It requires cancellation handlers in the ipcp and irmd to be implemented to ensure safe cancellation during operation and shutdown.
* ipcpd: Add threadpool manager to DHTdimitri staessens2017-09-241-45/+54
| | | | | | | | | | | This adds a threadpool manager to the DHT. This was needed because the detached thread could cause a data race on shutdown. The threadpool manager is revised to allow multiple instances in a single program. The irmd and ipcp now store commands in a buffer (list) instead of a single buffer before passing it to handler threads.
* ipcpd: normal: Make PFF policy-basedSander Vrijders2017-09-201-0/+1
| | | | | This turns the PDU Forwarding Function of the IPCP into a policy. For now only the simple PFF policy is available.
* tools: Add tool to connect IPCP componentsdimitri staessens2017-08-281-0/+28
| | | | | | | | | | | | This enables user-written tools to instruct IPCPs to establish and tear down connections (a.k.a. adjacencies) between its internal components (Management and Data Transfer). For more info, do "irm ipcp connect" or "irm ipcp disconnect" on the command line. This commit exposes a deletion bug in the RIB where FSO's fail to unpack/parse. This will be fixed when the RIB is deprecated.
* ipcpd: Deprecate gam as autonomous componentdimitri staessens2017-08-281-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The graph adjacency manager has been deprecated in favor of providing an external interface into the connectivity manager so that adjacencies can be controlled from the command line, user scripts or user applications. The gam and its associated policies were removed from the normal IPCP and the IRM configuration tools. The "/members" part of the RIB was deprecated. Removal of the gam means that initial connectivity based on changes in the RIB can't be provided, so some changes were required throughout the normal IPCP. The enrollment procedure was revised to establish its own connectivity. First, it gets boot information from a peer by establishing a connection to the remote enrollment component and downloading the IPCP configuratoin. This is now done using its own protocol buffers message in anticipation of deprecation of the RIB and CDAP for communication within a DIF. After the boot information is downloaded, it establishes a data transfer flow for enrolling the directory (DHT). After the DHT has enrolled, it signals the peer to that enrollment is done, and the data transfer connection is torn down. Signaling connections is done via the nbs struct, which is now passed to the connmgr, which enables control of the connectivity graph from external sources.
* lib, ipcpd, irmd: Fix several memleaksSander Vrijders2017-08-231-3/+1
| | | | | This fixes several memleaks as reported by valgrind. It also fixes some calls to close() with -1.
* Merged in dstaesse/ouroboros/be-build (pull request #557)dimitri staessens2017-08-211-14/+5
|\ | | | | | | build: Revise the build system
| * build: Revise the build systemdimitri staessens2017-08-211-14/+5
| | | | | | | | | | | | | | | | | | | | This revises the build system to have configuration per system component. System settings can now be set using cmake. The standard compliance defines were removed from configuration header and are set in the sources where needed. Also some small code refactors, such as moving the data for shims out of the ipcp structure to the respective shims were performed.
* | ipcpd, irmd: Fix data racesdimitri staessens2017-08-191-3/+2
|/ | | | | | Fixes a data race in the IRMd when IPCPs bail immediately after being created (e.g. due to an error). Fixes a race between the acceptor threads and the threads managed by threadpool manager upon shutdown.
* irmd, ipcpd: Signal acceptor onlydimitri staessens2017-08-161-2/+10
| | | | | This adds an extra condvar so the mainloops can signal the acceptor thread without waking up all mainloops.
* irmd, ipcpd: Listen on a dedicated accept() threaddimitri staessens2017-08-161-61/+138
| | | | | | | | | | | The IRMd and IPCPs will now call accept on their command sockets from a single thread that will dispatch work to the other threads. This solves a problem on OS X and FreeBSD where accept() doesn't time out when setting SO_RCVTIMEO on the socket. Calling kqueue or select() on that socket to wait for events before calling accept() didn't solve it since select() or kqueue() might wake up multiple threads, with the non-working threads again blocked on the accept() on shutdown.
* build: Replace fsf snail mail with contact URLdimitri staessens2017-08-131-1/+1
|
* lib, ipcpd, tools: Fix enum assignmentsSander Vrijders2017-08-101-5/+0
| | | | This fixes several assignments to the wrong enum type.
* build, lib, ipcpd, irmd: Add support for libgcryptdimitri staessens2017-08-091-9/+44
| | | | | | | | | | | | | | | | This adds support for libgcrypt. If at least version 1.7.0 of libgcrypt is present, it may be used for secure random number generation and is used for hashing in the irmd/ipcp. The hash definitions are moved to the internal hash.h header, and defined independently of the hashes that are defined as part of the directory policy for the normal IPCP. The translation is moved from the IRMd to ipcpd/ipcp.h. The bootstrap call from the IRMd expects the IPCP to return the correct hash algorithm with a dif_info struct, which is in line with the behavior of the enroll call. This also improves how some platform checks in the build system are handled.
* lib: Simplify initializing flowsSander Vrijders2017-08-011-1/+3
| | | | | This refactors dev.c to have a common function called init_flow that is called whenever a flow is allocated in dev.c
* lib: Add threadpool managerdimitri staessens2017-07-261-160/+21
| | | | | | | | This adds a threadpool manager component in the library that is used in the IRMd and IPCPs. The threadpool manager now doesn't detach threads but does a join when they exit. This solves a data race in the previous implementation where some threads were not completely finished upon release of some resources.
* Merged in dstaesse/ouroboros/be-dht (pull request #529)dimitri staessens2017-07-181-1/+0
|\ | | | | | | ipcpd: Add DHT as directory in normal IPCP
| * ipcpd: Add DHT as directory in normal IPCPdimitri staessens2017-07-181-1/+0
| | | | | | | | | | | | | | | | | | This implements a Distributed Hash Table (DHT) based on the Kademlia protocol, with default parameters set as used in the BitTorrent Mainline DHT. This initial implementation is almost feature complete, except for some things to be done after a testing period: caching and stale peer bumping, and setting the expiration timeout via the IRM tool.
* | ipcpd: Log exit status before log_fini()dimitri staessens2017-07-161-2/+2
|/
* ipcpd, lib, irmd: Hardcode shim hash algorithmsSander Vrijders2017-07-121-2/+4
| | | | | | | This will hardcode the shim hash algorithms as they don't have an enrollment phase. Fixes #44
* ipcpd: Fix routing type configurationdimitri staessens2017-06-051-5/+6
|
* ipcpd: Allow specifying fixed syntaxdimitri staessens2017-05-151-25/+20
| | | | | | This commits adds the functions and messages to specify a fixed protocol syntax during CACEP. It also revises the messages for specifying the DT protocol syntax from the irm tool.
* ipcpd: Add capability reportingdimitri staessens2017-04-271-2/+10
| | | | | | | | The IPCP will now report the DIF name and the hash value to the IRMd as a dif_info struct. This can later be extended to add further capability reporting. Some bugfixes in normal. Fixes #24
* Merged in dstaesse/ouroboros/be-hashing (pull request #484)dimitri staessens2017-04-161-9/+9
|\ | | | | | | Be hashing
| * ipcpd: Allow specifying the hash algorithm to usedimitri staessens2017-04-161-9/+9
| | | | | | | | Currently CRC32, MD5, and SHA3 (224, 256, 384 and 512 bit) are supported.
* | irmd, ipcpd: Include socket in select() for FreeBSDdimitri staessens2017-04-161-1/+1
|/ | | | Fixes #41
* include, lib: Rename ap_init/ap_finidimitri staessens2017-04-131-4/+4
| | | | Fixes #35
* lib, ipcpd, irmd: Register hash instead of namedimitri staessens2017-04-131-46/+165
| | | | | | | | | All information passed over the IRMd/IPCP boundary for using IPC services (flow allocation, registration) is now hashed. This effectively fixes the shared namespace between DIFs and the IRMDs. This PR also fixes some API issues (adding const identifiers), shuffles the include headers a bit and some small bugs.
* ipcpd: Fix race condition with concurrent allocsdimitri staessens2017-04-061-2/+11
|
* lib, irmd: Implement flow allocation timeoutdimitri staessens2017-04-061-1/+3
| | | | | | Setting the timeouts on flow_alloc and flow_accept will now work. This makes some changes to the UNIX sockets used for management communication between the APs, IRMd and IPCPs.
* ipcpd: Add lock for allocation requestsSander Vrijders2017-04-051-87/+61
| | | | | This adds a lock to prevent a race condition between flow_req_arr and flow_alloc_resp.
* ipcpd, irmd: Fix cleanup of thread resourcesdimitri staessens2017-04-041-23/+16
|