summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* lib: Implement timeout on blocking writeDimitri Staessens2018-03-121-5/+6
| | | | | | | | | | This completes the implementation of the SNDTIMEO for a blocking write. Fixes #6. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Add IPCP over DIX EthernetDimitri Staessens2018-03-101-2/+6
| | | | | | | | | | | | | | | | | | This adds an IPC Process that uses DIX Ethernet with an Ethertype that is configurable at bootstrap. This allows parallel DIX layers over the same Ethernet network with different Ethertypes (and one LLC layer). It allows jumbo frames in the future, and should avoid the problems we have with some routers not handling LLC traffic very well. The destination endpoint ID is sent as a 16 bit integer, so the maximum payload is 1498 bytes in standard Ethernet, and 8998 bytes when Jumbo frames are used. The implementation is very similar to the Ethernet LLC IPCP, so it is implemented using preprocessor macros in the single source instead of duplicating code. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Add fccntl operation to get queue lengthsDimitri Staessens2018-02-281-3/+7
| | | | | | | | | | This adds the FLOWGRXQLEN and FLOWGTXQLEN operations to fccntl to get the number of packets that are in the receive and transmit buffers respectively. The flow statistics are updated to show these queue lengths. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Get RIB attributes from componentDimitri Staessens2018-02-201-0/+5
| | | | | | | | | | | | This revises the RIB so it gets the complete file attribute list from the component instead of setting some attributes in the library. This will allow setting read/write access later on in the component itself. The time of last change of lsdb entries in the file system is now set to the time of the last received Link State Update for that entry. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Revise Data Transfer component0.10.0Dimitri Staessens2018-02-134-13/+13
| | | | | | | | | | | This makes the TTL non-optional and allows the maximum (initial) value of the TTL to be specified at bootstrap (the default is set to 60). The fd in the DT PCI is now called EID (Endpoint ID). The names "dif" and "ae" have been replaced by "layer" and "component" respectively in all sources. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* build: Use GNUInstallDirs instead of hardcoded values0.9.9Sander Vrijders2018-02-061-1/+1
| | | | | | | | This changes the build to use GNUInstallDirs instead of hardcoded values. Package maintainers can then override these defaults by passing the correct value to cmake on the command line. Signed-off-by: Sander Vrijders <[email protected]>
* build: Add option to disable SWIG supportDimitri Staessens2018-02-061-49/+54
| | | | | | | | This allows disabling swig support on systems where swig is installed but it fails building (e.g. some versions of Raspbian). Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* include: Improve definitions of fccntl flagsDimitri Staessens2018-01-181-2/+2
| | | | | | | | Defining FLOWFNONBLOCK in terms of FLOWFRNOBLOCK and FLOWFWNOBLOCK and FLOWFDEFAULT in terms of FLOWFRDWR clarifies their meaning. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* doc: Set CC-BY 4.0 license on the man pages0.9.1Dimitri Staessens2018-01-111-1/+1
| | | | | | | | This adds the Creative Commons Attribution License 4.0 to the man pages instead of the Copyright. Also fixes the data in version.h. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* include: Add version header0.9.0Dimitri Staessens2018-01-103-1/+38
| | | | | | | | This moves the version definition for Ouroboros into its own header file, which is generated by CMake and installed on the system. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* include, src: Update copyright to 2018Dimitri Staessens2018-01-0938-38/+38
| | | | | | | Happy New Year, Ouroboros. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Use the term "layer" and deprecate "shim"Dimitri Staessens2017-12-191-7/+7
| | | | | | | | | | | | | | This changes the terminology to use layer instead of DIF and deprecate the word "shim" for the IPCPs that attach to Ethernet LLC and UDP .The terminology has not yet been changed in the variable names etc. This reflects the design choices in Ouroboros to make IPCPs pure resource allocators instead of also providing an "IPC service". The Ouroboros IPCPs that attach to Ethernet and UDP implement the allocator and are thus not really shims. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Integrate raptor into ouroboros 0.8Dimitri Staessens2017-12-151-0/+1
| | | | | | | | | | | The raptor code is refactored to completely remove reduntant code relating to addresses. The dependency on the google protocol buffers is removed. The build system will only build raptor if the relevant kernel module is found on the system. The irm tool and the relevant documentation are updated. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib, tools: Rename application process and instanceDimitri Staessens2017-12-026-27/+26
| | | | | | | | | | | This refactors ouroboros to use "program" instead of "application process" and "process" instead of "application process instance" to align with current naming in current Operating Systems courses instead of the ISO nomenclature adopted by RINA. This change permeates through the entire implementation. Also contains some minor other refactors. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* build: Fix detection of python for swig bindingsDimitri Staessens2017-11-101-3/+6
| | | | | | | | | | The cmake build only looked for the libraries but not the interpreter, which caused the build to fail if the library was present, but the interpreter was not installed and executable using the "python" command. The build now looks for the python interpreter as well. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Use packed struct for FRCT header accessDimitri Staessens2017-11-081-2/+2
| | | | | | | | | | | | | | | This replaces the variable FRCT header with a packed struct, which significantly simplifies the implementation. The shm_du_buff calls to release the head/tail are updated to return a pointer to the original head or the new tail (in symmetry to the alloc calls, which return a pointer to the new head and old tail), so that it immediately points to the structure that is needed. The frct_pci sources are removed and frct is now fully in the frct.c source file. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Refactor FRCT implementationDimitri Staessens2017-11-072-114/+0
| | | | | | | | | | | | | | | | | | | | The frct_pci and rq headers are moved from include/ouroboros to src/lib since they are only needed in the library. FRCT is moved to its own source file. FRCT takes the application PDUs, encapsulates and processes them and hands them back. This makes it easier to disable FRCT should the application want to write to a "raw" flow. An FRCT instance is now allocated upon alloc and released upon dealloc. The FRCT data structure is split into a sender and receiver connection record. Setting a new configuration will now be done upon sending the next data PDU, which will flag the DRF for a new run and use that configuration. This avoids some issues should packets arrive out-of-order, and simplifies setting a configuration. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* dev: Split nonblocking read and writeDimitri Staessens2017-10-301-1/+4
| | | | | | | | | | The FLOWFNONBLOCK flag now has two subflags FLOWFRNOBLOCK and FLOWFWNOBLOCK which allows setting the behavior of read and write independently. The default behavior is unchanged (blocking read and write). Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Deprecate ouroboros_init and ourboros_finidimitri staessens2017-10-143-7/+4
| | | | | | | | | | | | | | This commit deprecates ouroboros_init and ouroboros_fini and adds them as a constructor or destructor, causing these function to be run automatically when a program that links to the library calls and exits main(). For this to fully work, the library had to be split so that we can avoid the irmd calling these functions (the IRMd has to create the shm structures on which these calls depend). The library is split in 3 parts: libouroboros-dev, libouroboros-irm and libouroboros-common. The latter is linked to the other two so that including libouroboros-dev or libouroboros-irm will also link libouroboros-common.
* lib: Cancel tpm threads instead of marking exitdimitri staessens2017-09-301-4/+0
| | | | | | | | | This makes the threadpool use pthread_cancel instead of setting an exit flag that threadpool managed threads check periodically. This drastically reduces CPU consumption in the irmd when running a lot of applications. It requires cancellation handlers in the ipcp and irmd to be implemented to ensure safe cancellation during operation and shutdown.
* ipcpd: normal: Add Loop-Free Alternates routingSander Vrijders2017-09-291-1/+2
| | | | | | This adds the Loop-Free Alternates (LFA) policy. In case a link goes down a LFA may be selected to route the SDUs on without causing loops instead of the main hop that just went down.
* ipcpd: Add threadpool manager to DHTdimitri staessens2017-09-241-10/+13
| | | | | | | | | | | This adds a threadpool manager to the DHT. This was needed because the detached thread could cause a data race on shutdown. The threadpool manager is revised to allow multiple instances in a single program. The irmd and ipcp now store commands in a buffer (list) instead of a single buffer before passing it to handler threads.
* lib: Clean up bitmap implementationdimitri staessens2017-09-231-5/+5
| | | | | | There was a return -1 in the allocate call which is unsafe since -1 may be a valid id in the bitmap. Since it's a data structure for internal use, I replaced the NULL checks with assertions.
* ipcpd: normal: Add alternate hop PFFSander Vrijders2017-09-212-6/+10
| | | | | This adds a PFF that returns an alternate hop as next hop in case the hop that would have been returned is down.
* ipcpd: normal: Make PFF policy-basedSander Vrijders2017-09-201-0/+5
| | | | | This turns the PDU Forwarding Function of the IPCP into a policy. For now only the simple PFF policy is available.
* ipcpd: Enroll DHT when creating dt connectiondimitri staessens2017-09-191-2/+4
| | | | | | | | | The DHT will now enroll or sync when a data transfer connection is added. This avoids the need to create a temporary data transfer connection during enrollment (and speeds it up considerably). The notifier system was modified to take an opaque pointer to the object that registers as a parameter.
* ipcpd, lib: Add flow down eventsSander Vrijders2017-09-193-2/+12
| | | | | | | | This adds the flow down event to Ouroboros. In the shim-eth-llc, a netlink socket is opened which listens to device up/down events. For each event the flow is then adjusted with fccntl to notify the user the flow is down or back up again. In the normal IPCP an event is thrown if a write reports that the flow is down.
* lib: Provide RIB API to export internals via fusedimitri staessens2017-09-181-0/+46
| | | | | | | This adds a virtual RIB that is accessible as a filesystem that is accessed through a fuse mountpoint (configurable , default is /tmp/ouroboros). Currently, each IPCP will export its link state database.
* lib: Add reordering queue to FRCTSander Vrijders2017-09-151-0/+47
| | | | | This adds a reordering queue to FRCT so that SDUs can be delivered in-order when requested.
* build: Fix DDNS tool detection for shim-udpdimitri staessens2017-09-131-3/+5
| | | | | | This fixes output when detecting DDNS tools and homogenizes output and the APIs used to pass variables between the build system and the sources. Fixes some minor issues and typos).
* ipcpd: Revise internals of normal IPCPdimitri staessens2017-09-126-265/+12
| | | | | | | | This removes the RIB as a datastructure and CDAP as the protocol between IPCPs. CDAP, the rib and related sources are deprecated. The link-state protocol policy is udpated to use its own protocol based on a simple broadcast strategy along a tree. The neighbors struct is deprecated and moved to the library as a generic notifier component.
* lib: Add fccntl configuration commanddimitri staessens2017-08-317-78/+79
| | | | | | | This replaces the flow_set_* commands with a single fccntl command that can configure flows and the FRCT instance. For more details, see "man 3 fccntl".
* irmd: Fix deleting corrupt shm fileSander Vrijders2017-08-291-0/+2
| | | | | This will delete the rdrbuff also when it has been corrupted before. Otherwise the irmd won't start, as experienced on my desktop.
* dev: Revise fqueue API and add man pagesdimitri staessens2017-08-291-16/+16
|
* Merged in dstaesse/ouroboros/be-deprecate-gam (pull request #572)dimitri staessens2017-08-283-14/+21
|\ | | | | | | Be deprecate gam
| * tools: Add tool to connect IPCP componentsdimitri staessens2017-08-282-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | This enables user-written tools to instruct IPCPs to establish and tear down connections (a.k.a. adjacencies) between its internal components (Management and Data Transfer). For more info, do "irm ipcp connect" or "irm ipcp disconnect" on the command line. This commit exposes a deletion bug in the RIB where FSO's fail to unpack/parse. This will be fixed when the RIB is deprecated.
| * ipcpd: Deprecate gam as autonomous componentdimitri staessens2017-08-281-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The graph adjacency manager has been deprecated in favor of providing an external interface into the connectivity manager so that adjacencies can be controlled from the command line, user scripts or user applications. The gam and its associated policies were removed from the normal IPCP and the IRM configuration tools. The "/members" part of the RIB was deprecated. Removal of the gam means that initial connectivity based on changes in the RIB can't be provided, so some changes were required throughout the normal IPCP. The enrollment procedure was revised to establish its own connectivity. First, it gets boot information from a peer by establishing a connection to the remote enrollment component and downloading the IPCP configuratoin. This is now done using its own protocol buffers message in anticipation of deprecation of the RIB and CDAP for communication within a DIF. After the boot information is downloaded, it establishes a data transfer flow for enrolling the directory (DHT). After the DHT has enrolled, it signals the peer to that enrollment is done, and the data transfer connection is torn down. Signaling connections is done via the nbs struct, which is now passed to the connmgr, which enables control of the connectivity graph from external sources.
* | lib: Add configuration message to FRCTSander Vrijders2017-08-261-0/+6
|/ | | | | This adds the configuration message to FRCT, which allows for configuring the connection.
* lib: Fix CRC check and add frct_clearSander Vrijders2017-08-221-0/+2
| | | | | | This adds the CRC check by default on outgoing SDUs. It fixes some errors in the serialization and deserialization of the SDU. frct_clear was added to avoid bad initialization of the array of FRCT instances.
* lib: Make timerwheel a passive componentSander Vrijders2017-08-221-0/+2
| | | | | | This turns the timerwheel into a passive component since it is used by application using the library. The user of the timerwheel now has to call timerwheel_move to advance the timerwheel.
* build: Revise the build systemdimitri staessens2017-08-214-133/+19
| | | | | | | | | | This revises the build system to have configuration per system component. System settings can now be set using cmake. The standard compliance defines were removed from configuration header and are set in the sources where needed. Also some small code refactors, such as moving the data for shims out of the ipcp structure to the respective shims were performed.
* lib: Add basic FRCT mechanismsSander Vrijders2017-08-175-3/+123
| | | | | | | | | | This adds the basic FRCT mechanisms to the library. Upon flow alloc or accept an FRCT instance is now created and used when reading or writing to the flow. The timerwheel has been refactored to allow recharging timers and removing them and is now part of the library. The first SDU sent over the connection has the DRF set and this initializes the connection. Sender and receiver inactivity timers are added.
* ipcpd: Support Berkeley Packet Filter in LLC shimdimitri staessens2017-08-171-1/+10
| | | | | This adds support reading Ethernet frames using the Berkeley Packet Filter (BPF). Ouroboros now fully runs on OS X Sierra.
* build: Replace fsf snail mail with contact URLdimitri staessens2017-08-1340-80/+40
|
* build: Fix compilation on OS X Sierradimitri staessens2017-08-113-25/+3
|
* lib, ipcpd, tools: Fix enum assignmentsSander Vrijders2017-08-101-2/+2
| | | | This fixes several assignments to the wrong enum type.
* build, lib, ipcpd, irmd: Add support for libgcryptdimitri staessens2017-08-093-14/+34
| | | | | | | | | | | | | | | | This adds support for libgcrypt. If at least version 1.7.0 of libgcrypt is present, it may be used for secure random number generation and is used for hashing in the irmd/ipcp. The hash definitions are moved to the internal hash.h header, and defined independently of the hashes that are defined as part of the directory policy for the normal IPCP. The translation is moved from the IRMd to ipcpd/ipcp.h. The bootstrap call from the IRMd expects the IPCP to return the correct hash algorithm with a dif_info struct, which is in line with the behavior of the enroll call. This also improves how some platform checks in the build system are handled.
* irmd: Specify timeout per commandDimitri Staessens2017-08-051-2/+5
| | | | | | | The commands towards the IPCPs have different time requirements, but the irmd had only a single timeout value to wait for a response. This commit allows setting different timeouts for the IRMd based on the command, configurable globally.
* build: Add check for robust mutexesSander Vrijders2017-08-032-1/+2
| | | | | | This adds a check for robust mutexes. The constant HAVE_ROBUST_MUTEX is set accordingly in config.h. It also adds some other fixes to make the prototype compile on the Hurd.
* lib: Simplify initializing flowsSander Vrijders2017-08-012-5/+5
| | | | | This refactors dev.c to have a common function called init_flow that is called whenever a flow is allocated in dev.c
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 22:37:58 +0000