summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
...
* lib: Add initial flow liveness monitoringDimitri Staessens2022-02-243-23/+163
| | | | | | | | | | | | | | | | | | This adds flow liveness monitoring for flows, with a fixed timeout of 120s. I will make it configurable at flow allocation later on (timeout needs to be communicated to the peer). If one peer dies, or doesn't call any IPC calls (flow_write/flow_read/fevent) it will stop sending keepalives and the other peer's read/writes will error on an -EFLOWDOWN after the timeout expires. Packets without a payload (0 length packets) are interpreted as keepalive packets for the flow. They can be sent from any application, but they will not trigger a message read at the receiver side (0 as a return value on flow_read indicates a previous partial read has completed at exactly the buffer size). Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Maintain a list of flows in flow_setDimitri Staessens2022-02-241-26/+99
| | | | | | | | | The flow_set will now keep a list of the flows in the set, this makes it more efficient to iterate over the flows. Extending the public API for fset_t with an iterator will also be useful. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix potential double unlock in ethDimitri Staessens2022-02-211-23/+15
| | | | | | | | | When handling management frames, there was a cancellation point after the unlock, which would cause the cleanup handler to attempt a double unlock if the thread was cancelled at that point. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Handle FLOWDOWN during blocking readDimitri Staessens2022-02-211-3/+7
| | | | | | | | | | The blocking read from the rbuff was not correctly handling flow down states, returning a valid index. The attempt to fetch the header then failed on an assertion. The blocking read will now return -EFLOWDOWN if the flow is marked down by the IPCP. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Refactor sendingflow allocation responseDimitri Staessens2022-02-211-21/+33
| | | | | | | | Small refactor taking the wait for the flow allocation to complete out. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Refactor flow allocator message handlingDimitri Staessens2022-02-211-113/+170
| | | | | | | | This refactors the single long function that handles incoming packets destined for the flow allocator. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix hashing and overlapping memcpy in pffDimitri Staessens2022-02-182-12/+4
| | | | | | | | | The pft hash function assumed mem_hash allocates memory, but it does not. There was also a memcpy with potentially overlapping memory regions, which is undefined behaviour. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix deadlock in dht_unregDimitri Staessens2022-02-181-8/+3
| | | | | | | | | The dht_del function was called under lock in dht_unreg, and then tried to take the lock again, a 100% deadlock. Also fix uninitialized value in dht_retrieve. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Use random buffer for flat addressDimitri Staessens2022-02-181-15/+4
| | | | | | | Less code, and less chance of a collision. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix potential overflow in DDNS resolverDimitri Staessens2022-02-181-1/+1
| | | | | | | The count value could be IPCP_UDP_BUF_SIZE, overflowing buf. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Remove unused wait_state functionDimitri Staessens2022-02-182-34/+0
| | | | | | | Probably a leftover from previous shutdown logic. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Check return value of enroll_packDimitri Staessens2022-02-181-2/+2
| | | | | | | Better to check the error code than the out parameter. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix bounds check on PROG_MAX_FLOWSDimitri Staessens2022-02-181-2/+2
| | | | | | | Off-by-one error in the bounds check. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* irmd: Fix race condition in sanitize threadDimitri Staessens2022-02-181-4/+5
| | | | | | | | | Unlocking the flows while iterating could cause a modification during the iteration. Added pthread_cleanup handlers as the thread could get cancelled while holding a lock. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix initialization of hash width in DHTDimitri Staessens2022-02-171-5/+7
| | | | | | | | | | The width of the Kademlia hash function (dht->b) was set only after the ID was created. This should have failed miserably, but the bytes after were fine as they were just a randomized ID in the Kademlia network. Nasty. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* irmd: Fix argvdup util functionDimitri Staessens2022-02-171-10/+12
| | | | | | | | The argvdup function didn't handle the case where argc is 0. Small refactor that also handles this case correctly. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix free in fail path of readdirDimitri Staessens2022-02-174-3/+12
| | | | | | | | | The free of the buffer in the failure path of the readdir RIB functions was taking the wrong pointer in a couple of places. The FRCT RIB readdir was missing error handling for malloc and strdup. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Don't use pointer to set FRCT flagsDimitri Staessens2021-12-293-13/+18
| | | | | | | | | | | | | | | | | | The fccntl call FRCTSFLAGS was using a pointer to a flags so set flags, which should just be a regular uint16_t. For instance, the FRCTLINGER flags can now be turned off using fccntl(fd, FRCTSFLAGS, FRCTFRESCNTL | FRCTFRTX) leaving only resource control (flow control, FRCTFRESCNTL) and retransmission enabled. Note that retransmission (FRCTFRTX) can't be enabled or disabled on a live flow, it will be set on flow allocation. Updates the man page for fccntl to add these FRCT options. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Use wrlock for rotating multipath pff entryDimitri Staessens2021-12-291-12/+14
| | | | | | | | The multipath pff entry was modified (rotated) under a read lock, which is now changed to a write lock. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Allow creation of multiple directoriesDimitri Staessens2021-12-295-421/+523
| | | | | | | | | To allow merging large network layers, a situation will arise where multiple directories need to coexist within the layer. This reverts commit 9422e6be94ac1007e8115a920379fd545055e531. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Ease lock in timerwheel0.18.4Dimitri Staessens2021-12-222-3/+3
| | | | | | | It was taking a write lock when a read lock was sufficient. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Fix waiting for FRCT at deallocationDimitri Staessens2021-12-221-6/+6
| | | | | | | | | | This is a fix to wait for outstanding retransmissions when a flow is deallocated. Instead of waiting the full timeout, it will now wait in the same tic increments used within FRCT. Bit of a stopgap at the moment, FRCT and the flows are in need of a serious refactor. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Add missing rwlock unlock in FRCTDimitri Staessens2021-12-221-2/+4
| | | | | | | There was a missing unlock in FRCT. Also fixes some indentation. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix waiting for FRCP to time outDimitri Staessens2021-12-222-2/+3
| | | | | | | | | | The timeout variable was not correctly passed to the IPCP, causing flow IDs to be reused immediately instead of waiting for the full Delta-t to expire. This caused all kinds of havoc with retransmissions in reliable flows. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Fix flow dealloc after expired FRCT timeoutDimitri Staessens2021-12-221-0/+1
| | | | | | | | | | If the timeout is already expired, the wait variable would be negative and return a negative value for the __frcti_dealloc function, thinking that the timeout was not expired causing an unnecessary wait even if all packets are acknowledged. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Set initial sender rwe to sender seqnoDimitri Staessens2021-12-221-1/+1
| | | | | | | | | | | The initial sender right window edge (indicating acknowledged packet sequence number) was initialized to seqno - 1. This should be the same as seqno, since we acknowledge with the next expected sequence number. It also indicates that a flow without traffic has no outstanding acknowledgements. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Add dt component to regular startup flowDimitri Staessens2021-12-061-16/+9
| | | | | | | | | The dt component had init/start commands somewhat outside of the overall flow of startup of the unicast IPCP. This was probably some old code and wasn't needed. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Consolidate policies within folderDimitri Staessens2021-12-0611-12/+125
| | | | | | | | Each policy folder will now have a pol.h file, so that (in most cases) adding a new policy only requires changes inside the policy folder. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Make the DHT a directory policyDimitri Staessens2021-12-068-29/+81
| | | | | | | | The DHT is now a proper directory policy instead of a unicast IPCP component. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Move DHT to stackDimitri Staessens2021-12-064-498/+410
| | | | | | | | | | This makes the DHT a single directory implementation and moves it to the stack (init/fini instead of create/destroy). This is a step towards making it a directory policy, in line with our other policy implementations. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Restructure policy codeDimitri Staessens2021-12-0633-72/+106
| | | | | | | | The policies were all in a single folder pol/, and have been moved to a folder per component/mechanism to keep things a bit more orderly. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Remove old rib_fini codeDimitri Staessens2021-12-061-3/+0
| | | | | | | | There was some leftover code in dev.c wrt to the process RIB that is not needed anymore. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix fallthrough warningsDimitri Staessens2021-12-061-0/+4
| | | | | | | Some cases were not guarded by explicit fallthrough where needed. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Fix undefined behaviour in sha3Dimitri Staessens2021-12-061-2/+1
| | | | | | | | | Arithmetic with NULL pointers is undefined behaviour. Caught by clang 13. Fixed by using uintptr_t, which is guaranteed to be the size of a pointer. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* build: Install into /usr/local by default on OS XDimitri Staessens2021-10-291-1/+7
| | | | | | | | | | On more recent Mac OS X (>= Catalina) the system volume is read-only, even with System Integrity Protection disabled. This requires an additional remount step to install something into /usr. Probably better to play by their rules and default the install to /usr/local. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* build: Bump patch level version number0.18.3Sander Vrijders2021-09-111-1/+1
| | | | | | | | | The last couple of commits fix compilation on OS X. So bumping the patchlevel makes sense to fix compilation for the master branch as well. Signed-off-by: Sander Vrijders <[email protected]> Signed-off-by: Dimitri Staessens <[email protected]>
* ipcpd: Fix conversion to uint64_tDimitri Staessens2021-09-051-1/+1
| | | | | | | | The print output for MB-ECN had a size_t conversion to uint64_t that some compilers complain about. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Don't include prctl.h on non-linux systemsDimitri Staessens2021-09-051-2/+4
| | | | | | | prctl.h is linux only. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Don't use sigwaitinfo() on OS XDimitri Staessens2021-09-051-1/+13
| | | | | | | | | Apparently that function isn't implemented on some versions of OS X. On these systems, we can just use sigwait, but now the IPCP will also accept signals not coming from the IRMd. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix additive increase in CA-MB-ECNDimitri Staessens2021-07-211-2/+2
| | | | | | | | | | | | | | | | | The logic for additive increase was botched. It was adding to the current window limit, and to avoid a count-to-infinity when sending below the limit, I added a check that the application was trying to send more than the current limit. This fails in congestion avoidance mode when the IPCP is throttling traffic below the limit; causing the app to never increase the congestion window (and even worse, to keep decreasing in some cases). The Additive Increase will now always add bandwidth to the latest sending rate instead of the window bandwidth limit, avoiding all the problems. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix flow allocator build without fuseDimitri Staessens2021-07-181-3/+4
| | | | | | | | The u_snd and u_rcv variables were not guarded by ifdefs when updating. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Export flow updates sent/recvd to fa RIBDimitri Staessens2021-07-121-1/+9
| | | | | | | | The RIB of the flow allocator will now export the number of flow updates sent/received per flow. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Reduce Linux slack timerDimitri Staessens2021-07-123-0/+10
| | | | | | | | | This will reduce the linux high resolution slack timer in IPCPs. Linux default for userspace processes is 50us. It is configurable at build using IPCP_LINUX_SLACKTIMER_NS. Default is now 1us. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix update rate for Multi-Bit ECNDimitri Staessens2021-07-121-1/+1
| | | | | | | | The rate was supposed to be 1 update per 8 data packets, but the calculation was doing 1 update per 4 data packets. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* unicast: Fix RIB stats for congestion avoidanceDimitri Staessens2021-07-101-2/+2
| | | | | | | The upstream/downstream stats were switched. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Don't initialize process RIB for IPCPsDimitri Staessens2021-07-102-10/+5
| | | | | | | | | | | | | This will skip rib_init() at __init() for IPCPs (or at least, processes that have "ipcpd" in the executable name). The previous code tried to unmount the generic mount and then remount under the ipcp name, but it often failed because fuse_mount() is asynchronous and the mount was not up at the time of the unmount() call. Renaming the mount instead of unmounting failed for the same reason. This is a better fix for now. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Application RIB with FRCT statisticsDimitri Staessens2021-06-305-17/+173
| | | | | | | | | | Application flows can now be monitored from the RIB, exposing FRCT statistics (window edges, retransmission timeout, rtt estimate, etc). Application RIB requires user permissions to be able to access /dev/fuse. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* ipcpd: Fix layer info RIBDimitri Staessens2021-06-301-3/+8
| | | | | | | | Layer info was not converted to parse the full path with the latest RIB change. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* irmd: Fix unused variable in builds without fuseDimitri Staessens2021-06-301-1/+2
| | | | | | | The mode_t mask wasn't guarded by ifdefs. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
* lib: Pass full path for RIB entriesDimitri Staessens2021-06-295-18/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | The read functions for the RIB will now receive the full path, instead of only the entry name. For IPCPs, we organized the RIB in an /<ipcp>/<component>/entries structure with a directory per component, so we don't need the full path at this point. For process flow information, it's a lot more convenient to organize it the following way /<pid>/<fd>/stat We can then register/unregister the flow descriptor when the frct instance is created, and for getting the stats, we'd know the flow descriptor from the fuse file path. If we would create a file per flow instead of a directory per flow, something like /<pid>/flows/<fd> we'd need to do additional bookkeeping to list the contents of that directory (we would need to track all flows with an active FRCT instance), that fuse knows because it tracks the directories. Signed-off-by: Dimitri Staessens <[email protected]> Signed-off-by: Sander Vrijders <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 02:53:42 +0000